OPERATING FEATURES
W W W. N B F. C O M
1. TO ADJUST SEAT HEIGHT:
While seated, lean forward and reach under the right side
of the chair to locate the handle. Lift the handle and raise
your body up slightly to allow the chair to rise to the desired
height. To lower the seat, lift the handle while applying more
weight downward on the seat. The chair will descend until the
handle is released or the chair reaches the lowest position.
2. TO OPERATE TILT LOCKOUT:
lockout bar. Slide the bar to the left (toward the outside of the
chair), all the way out, to allow the chair to tilt backwards. To
lock the chair in the vertical position, sit upright and push the
bar to the right (toward the center of the chair).
3. TO ADJUST TENSION ON THE TILT:
Reach under the front center of the chair, grasp the round
knob and turn counterclockwise to make the tilt mechanism
knob clockwise until the desired resistance is found.
1. To Adjust Seat Height:
While seated, lean forward and reach under the
right side of the chair to find the handle. Lift the
OPERATING INSTRUCTIONS
11
12
13
WARNINGS
1. This product should be used by only one person at a time.
2. Do not use this chair unless all bolts, screws and knobs are
securely tightened.
3.
Save the hexagonal wrench.
Check that all bolts, screws and
knobs are tight every three months or as needed.
4. Dispose of packing material properly. Do not use the plastic
cover as a head covering. It may cause suffocation.
5. Do not use the chair as a stepladder.
6. Use this chair for its intended purpose only.
7. The casters sold with this chair are intended for use on
carpet. They are not recommended for use on tile or hard-
A S S E M B LY I N S T R U C T I O N S
MORGAN HIGH-BACK CHAIR