Getting Started with MAXserver Access Servers
0038
154
2.
To remove the SIMMs from the sockets, pull the retainers that hold the
SIMM outward (see Figure 43).
1
30
Pull retainers outward.
Figure 43 - Removing SIMMs
3.
Pull the SIMM toward you, then up. (Basically, you reverse the steps
shown in Figure 37.)
4.
Replace the MAXserver cover, and secure it with the four screws you
removed previously.
5.
Return the unit to the rack or flat surface from which you removed it,
and plug it back in.
