ST-IP
4
FTD QUICK START GUIDE
11
11
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing
poor image quality
.
● The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.
Steps:
1.
Rotate the trim ring counterclockwise to remove it from the
camera.
Figure 2-1
Dissemble the Camera
Trim Ring
Dome
Drive
