INSTRUCTIONS FOR RECESS FIX INSTALLATION:
1)
Drill, plug and screw the clip fix bracket in the centre of the opening reveal (wider screens may be
provided with 2 clip ). If the screen is not very wide, no clip is necessary.
2)
Clip the Cassette into the bracket, by locating the back edge and snapping into place. The
Cassette should fit neatly into the opening of the reveal.
3)
Slide the Side Guides (B) up onto the tongues of the Cassette end caps (G).
4)
Feel inside the Side Guide. There should be a small hook at the front internal face of the Guide.
The front external face of the guide rail also has a groove on the edge. The hook should face
away from the user.
5)
Pre-mark with a pencil, the visible face of the Side Guide to indicate where it will be fixed.
Recommended 50 - 60mm from top and bottom of the Guide. Your guide rails may have been
pre-drilled for recess fixing if you have selected this option.
6)
Push the Side Guides square against the walls of the reveal.
7)
Insert the black plastic Pile Opener Tool (optional) into the Guide at a point where you will fix into
the reveal, separating the strips of pile to clear access for drilling and screwing. This may require
