3.2. Nayar Switch installation at the lift car
1. Place the device at the lift car, so as to be accessible to all the connectors of the Nayar Switch by
the installer. The device must not be able to be manipulated by the elevator user.
2. Connect the
RJ45 cable
from Nayar Switch LAN connector to the device which is desired to be
supplied Internet connectivity, such as an Advertisim.
3. Connect the two previously used wires of the travelling cable, where the machine room device was
connected, to lift car Nayar Switch
IPBus
connector, considering the order of H and L cables.
Nayar Systems
Switch - 1_en
Page 11 of 19
