12345,S:$ablX:emergency_button_logic
(t/f)
X
indicates the number of the elevator car to configure and the logic can be
t
which stands for
normally
closed (NC)
or f that stands
for normally open (NO)
.
In both cases the response is:
[“OK”]
4.9.2.9. Hang up from elevator car programming
To set individually to hang up the emergency phone from the elevator car, where X stands for the
elevator car number, use:
12345,S:$abchX:t
– hang up from the elevator car allowed
12345,S:$abchX:f
– hang up from the elevator car not allowed
In both cases the response is:
[“OK”]
4.9.2.10. Alarm filter programming
To enable or disable the alarm filter of each elevator car individually, where X stands for the elevator car
number, send:
12345,S:$abfX:t
– alarm filter enabled
12345,S:$abfX:f
– alarm filter disabled
Response:
[“OK”]
4.9.2.11. End Of Alarm (EOA) notification
In order to indicate to the device that the rescue is done and the alarm situation is finished for a
particular elevator car use the following SMS:
12345,C:eoa:elevator_car_number
Response:
[“OK”]
Nayar Systems
GSR - 1_en
Page 30 of 35
