button to enter the menu. Select the following settings by pressing
and
buttons.
Includes Channel Setting, Background Sound Level, Noise Suppression Level, MIC Return, TALLY
Setting, two wire setting, Language Setting, Preload configuration, etc. Press
button to
enter a setting. Press
button to return to the previous menu after setting. Press
button
again to exit menu.
Channel Setting
Enter the menu and choose “Channel Setting”. Then press “Confirm” button to enter the setting.
Choose channel by pressing “Up” and “Down” button. The channel range is 25
-
110. Press “Exit”
button to return to the previous menu after setting.
It is advised to set a big channel spacing (30 channels or more) if two or more channels are used
for different teams at same place.
Each channel represents a certain frequency. Product type 400
-
470Mhz as below, other type is
not same.
Channel 25 (412.5MHz)
Channel 26 (413MHz)
...
Channel 109 (454.5MHz)
Channel 110(455MHz)
Background Sound Level
Enter the menu and choose “Background Sound Level”. Then press “Confirm” button to enter the
setting. Choose suitable level by pressing “Up” and “Down” button. There are 3 levels, namely 0,
1, 2. Select the suitable level according to the background noise level. Press “Exit” button to
return to the previous menu after setting.
The factory default setting is level 1, which is suitable for most situation.
Level 0 is suitable for a silent situation, just speak with a low voice.
Level 1 is suitable for most situation, you should speak with a loud voice. (Factory default setting)
Level 2 is suitable for a noisy situation, you should speak with a roar.
(Note: No need to change the setting in general. The voice may be intermittent if the level is too
high in a relatively quiet situation)
