Naxa Sound Pro NDS-1513, Instruction Manual

Page: 4 / 8

7
2
11
9
10
12 6
5
4
3
8
1
1. Standby: Press to put unit on standby mode
2. 0-9 Number Pad: Press to select track
number in USB or Memory Card mode
3. Volume Increase: Increase Volume
4. Previous: Press for Previous track in USB &
Memory Card mode. Press for previous
preset memory in FM Mode
5. Play/Pause: Press to Play/Pause in USB,
Memory Card, or Bluetooth mode, Press to
Mute in Aux Mode, Press to Scan FM stations
in FM mode.
6. EQ: Select EQ mode.
7. Mute: Mute Sound
8. Repeat: Press to repeat track
9. Next: Press for Next track in USB & Memory
Card mode. Press for Next preset memory in
FM Mode
10. Volume Decrease: Reduce Volume
11. Mode: Press to toggle – Bluetooth, USB,
Memory Card, FM, Aux modes
12. Scan: Scan FM stations in FM mode.
REMOTE CONTROL
11. DC 12V IN: Connection to a 12V external battery or other DC power source (Cable included)
12. AC Connection: Use the power cord to connect the unit to an AC outlet.
13. Antenna: Extend the telescopic antenna to maximize FM radio signal reception. Retract the
antenna after use to protect it from damage.
14. Charging Indicator: Red light indicates when the battery is charging. Green light indicates
when the battery is fully charged.
15. Master Level Volume Control: Turn this dial to adjust the master volume
16. Treble dial: Turn this dial to adjust the level of high frequencies
17. Bass dial: Turn this dial to adjust the level of low frequencies
18. Microphone Volume Control: Turn this dial to adjust the volume level of the microphone
input
19. Microphone Echo dial: Turn this dial to adjust the reverb effect level applied to the micro
phone input
20. Guitar Volume Control: Turn this dial to adjust the volume level of the guitar input
21. Guitar Input: Connection for a guitar.
22. Microphone Input: (Microphone Included): Plug in Microphone for Karaoke