Naxa NVP-3002C, User Manual

Page: 13 / 20

12
Pairing is the term used when two Bluetooth devices are connected wirelessly for
the first time. This allows the devices to see each other and sets up a one-to-one
communication channel between both devices.
Bluetooth Connection
1. Press the Power button to turn on the unit.
2. Press the Menu button to enter the menu screen.
3. Use the left / right directional arrows to select right side menu.
4. Use the up / down directional arrows to select Blue-tooth column.
5. Press the “OK” button to enter Bluetooth menu.
6. Use the lef/right directional arrows to select “ON”.
7. Turn on your external Bluetooth speaker and select Bluetooth pairing mode.
8. A few seconds later, an audio sound will prompt to notify you that the
projector and speaker are connected.
9. After connecting, the projector will sound through the external Bluetooth
speaker.
NOTE: When the BT can’t connect to this device auto-matically, please enter the
Bluetooth setup menu and select to resest BT. Then, the BT device will connect to
the projector automatically.
Bluetooth® Operation
Disconnecting Bluetooth Device
1. Press the Menu button to enter the menu screen.
2. Use the left / right directional arrows to select above
menu.
3. Use the up / down directional arrows to select BlueĐtooth column.
4. Press the “OK” button to enter Bluetooth menu.
5. Use the left/right directional arrows to select “OFF”
and disconnect Bluetooth.