Naxa NVP-2501C, User Manual

Page: 12 / 25

12
Remote Batteries
Remove the battery cover on the back of the remote
control by gently pushing it open. The battery cover can
then be raised. Insert the correct batteries (not included)
according to the polarity markings. Finally, replace the
cover.
NOTE:
• Batteries must not be exposed to excessive heat, such
as sunchine / fire.
• Make sure that the batteries are installed correctly.
• Do not mix old and new batteries.
• Only use the same or equivalent batteries as recom-
mended.
• Do not dispose of batteries in the fire, the battery could
explode or leak. Do not try to charge a battery.