Naxa NT-110, Instruction Manual

Page: 8 / 22

Page 8 Naxa Electronics
14 USB port Load a USB memory stick with compatible
media files, then set the active source mode
to USB.
15 SD card
slot Load an SD card with compatible media files,
then set the active source mode to CARD.
16 Antenna
input jack 75 ohm coaxial connector for TV antennas.
17 Head-
phone jack 3.5 mm stereo audio output.
18 AV1 In jack Use with the included A/V cable to connect
an external composite video/audio source,
then set the active source mode to AV1.
19 AV2 In jack Use with the included A/V cable to connect
an external composite video/audio source,
then set the active source mode to AV2.
20 DC input Use with the included AC power adapter or
DC power cord.
21 Master
Power
Switch Set to ON to use the TV. If you will not be
using the TV for an extended period of time,
set the switch to OFF to turn the unit off
completely. (The TV will use a little bit of
power when the switch is set to ON and the
TV is placed in Standby mode.)