Naxa NRC-191, Instruction Manual

Page: 8 / 24

Listening to the Radio
SNOOZE:
Turning OFF the Alarm
How to Set the SLEEP TIMER
Page 8 Naxa Electronics
Press the SNOOZE button when the alarm is sounding
to stop the alarm and have it sound again automatically
after 9 minutes.
In Radio or AUX playback mode, press and hold the
SNOOZE/SLEEP button until the sleep timer appears
on the display to activate the sleep function. Press the
SNOOZE/SLEEP button repeatedly to set the sleep
timer from 10 - 90 minutes. After 5 seconds, the sleep
timer will auto confirm and set.
To turn off the sleep timer before time is up, press
and hold the SNOOZE/SLEEP button to display the
remaining time and press the AL. OFF/POWER button
to disable the sleep timer.
DIMMER:
Press the DIM button repeatedly to set the brightness
level of the display. (Middle, Low, High).
Default setting is High.
Press the AL.POWER button once to access the
Radio input. The radio station number will
display on the screen. (87.5 - 108)
Press and hold the FUNC/Auto-SCAN button
to engage the auto search and store to cycle
through various radio stations and store into
preset memory.
Press the AL. OFF/POWER button to turn the
alarm OFF.
Snooze will temporarily disable the alarm for 9
minutes at a time up to 60 minutes.
If reception is poor, short press the Hour/
SKIP- and MIN/SKIP+ buttons to fine tune
your desired radio station.
Press the AL. 1/VOL- or AL. 2/VOL + buttons to
adjust the volume. (Min. V00 - Max. V16)