Naxa NRC-190, Instruction Manual, Page: 10 / 24

BUILT-IN QI WIRELESS CHARGER
1.
3.
1.
2.
2.
BUILT-IN USB CHARGER
Connect the USB plug from the external USB
device to the USB Charger port at the back of
the unit.
1.
Connect the AUX cable from the output jack
of your MP3 player or mobile phone to the
AUX input jack on the Radio.
AUX IN MODE
2. Press the /MODE button twice to access the
AUX input. AUX will be displayed on the
screen.
3.
Page 10 Naxa Electronics
When charging has completed, please
remove the mobile device from the unit.
Place a Qi supported mobile device on the
center of the charging surface as illustrated
below. The Qi inidicator light will display and
your mobile device should begin charging.
Check the mobile device’s charging status using
the charging icon displayed on the screen.
Unit should begin to charge.
Adjust the volume on both your MP3 player
or mobile device and on the unit to your
desired level.
When charging has completed, please
remove the mobile device from the unit.