Naxa NRC-181, Instruction Manual, Page: 8 / 16

Page 8 Naxa Electronics
Connecting the Unit
to Power
Before plugging in the AC/DC power adapter to
an AC wall outlet, make sure that the voltage of
your electricity supply is the same as that indi
-
cated on the rating plate or power adapter.
Battery Backup
Battery backup will preserve the current time,
alarm settings, and stored radio stations in the
case of power failure or interrupted AC power.
The LED display will remain off until power has
been restored.
Insert two UM-4 batteries (AAA) into the bat -
tery compartment. Be sure to observe the
proper polarity (the “+” and “-” signs) as indi -
cated inside the battery compartment.
Setting the Clock
Make sure the power is off before setting the
clock time. (Press and hold
ALM OFF/SOURCE/
POWER to turn off the power.)
1. Press and hold CLK/MEM until the display
begins to flash.
• Press the /HR and
/
MIN buttons
to adjust the time.
• Take note of the PM indicator when
setting the time.
2. Press
CLK/MEM
. The year will start to flash.
• Press the /HR and
/
MIN buttons
to adjust the year.