Advanced CD operation
1.
Press the
FWD/TUN+ button
（
#11
）
to skip to the next track. Press and hold to fast forward
the current track. Release the button to resume normal playback.
2.
Press the
REV/TUN- button
（
#10
）
to skip to the previous track. Press and hold to fast
rewind the current track. Release the button to resume normal playback.
Random playback
1.
Press and hold the
SLEEP/RDM button (#15)
either during playback or in STOP mode for 2
seconds and then release. You will see the letters RDM appear on the display to indicate the
RANDOM mode in active.
2.
If you enable the RANDOM function in STOP mode, press the
PLAY/PAUSE/BAND button
（
#1
）
to begin playback. If you enable the function during playback the next track will begin
the random order
3.
To cancel the RANDOM playback mode, press and hold the
SLEEP/RDM button (#15)
for
2 seconds and release again. The letters RDM will disappear from the display to indicate the
function has been cancelled.
Repeat function
1.
Before or during playback press the
REPEAT/PROG button (#6)
to repeat a single track
indefinitely. You will see REP appear on the display when active.
2.
To repeat all tracks on the disc, press the
REPEAT/PROG button(#6)
twice(or once more if
you have already activated the repeat once function).You will see REP on the
display
blinking
to indicate the repeat ALL function is active
3.
To cancel any repeat modes, press the
REPEAT/PROG button (#6)
once more (if in repeat
all mode or twice if in repeat once mode).The letters REP will disappear from the display.
CD program playback.
NOTE
：
You can only program a playback sequence while the disc is in STOP mode.
1.
Press and hold the
REPEAT/PROG button (#6).
You will see P01 appear on the display to
indicate the program function has been initiated.
2.
Use the
FWD/TUN+&REV/TUN- buttons
to select the track you want to play in slot No 1.
3.
Press the
REPEAT/PROG (#6)
to store the selected track in slot 1.The display will now
display P02 to indicate you're selecting the track for slot 2.
4.
Repeat steps 2 to 3 for every track you wish to program up to a maximum of 20 tracks. If you
try to program more than 20 tracks the display will revert back to P01 and will overwrite the
first slot again.
5.
Press the
PLAY/PAUSE/BAND button (#1)
to begin the programmed sequence playback.
6.
Should you wish to cancel the programming you can press the
STOP button
(#2)
to resume
normal function.