Page 6
Naxa Electronics
Setting the Alarms
1.
With the unit in CLOCK mode (i.e., the radio is
off):
•
Press and hold the
button to
set Alarm 1 (the Alarm 1 time will flash
on the display,) or;
•
Press and hold the
button to
set Alarm 2 (the Alarm 2 time will flash
on the display).
2. While the Alarm time is flashing on the display,
press the
button to adjust the alarm hour;
press the
button to adjust the alarm min
-
ute.
3. When the desired alarm time is set, press the
or
button. The clock will
display the current radio station.
•
To choose to wake to the radio, press the
or
button again to
finish setting the alarm.
•
To choose to wake to a buzzer, press
or
until the display reads “BU” then
press the
or
button
again to finish setting the alarm.
To enable or disable the alarms, press
or
. Check the Alarm 1 and Alarm 2 status
lights on the display to see the current alarm state.
⚠
L
Take note of the PM LED indicator
when setting the alarm time.
When the Alarm Sounds
Snooze Function
Whenever the alarm (radio or buzzer) activates, it
can be temporarily suspended 9 minutes by press
-
ing the SNOOZE button once.
The alarm will then sound again automatically after
10 minutes.
Summary of Contents for NRC-174
Page 10: ......
