Naxa NRC-167, Instruction Manual

Page: 7 / 12

www.naxa.com Page 7
MINUTE to adjust the time. Aim the projector
lens at a flat surface, and then turn the focus
dial to focus the image.
Setting the Alarm
1. You must switch off the radio before you
set the alarm time.
2. Press and hold the “ALARM 1” or “ALARM
2” button until the Hour display begins to
flash.
3. Press the ALARM 1 button again to select
a wake mode (wake by radio or by buzzer).
The display will show a picture of a bell to
indicate wake by buzzer; the music note
logo indicates wake by radio.
4. Set the alarm time after you select the
wake up mode. Press the “Hour” button
and the “Minute” button to adjust the
time.
5. Press the “ALARM 1” button once more to
finish setting the alarm time.
Canceling the Daily Alarm
Press the “ALARM OFF” button to stop the
alarm. The alarm will sound again at the same
time on the next day.
Canceling the Alarm
Press the “ALARM 1” or “ALARM 2” buttons.
The display will show “OFF” and all wake up
mode icons will also disappear. The alarm set
-
ting is canceled now.