background image

 

1

IMPORTANT NOTES 

INTRODUCTION 

 

 

Thank you for buying our product. 

 

 

Please read carefully throughout these operating instructions, so you will know how to operate your 
equipment properly. After you finished reading the instructions manual, put it away in a safe and 
handy place for future reference. 

WARNING  

To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid electrical 
shock, do not open the cabinet; refer servicing to qualified personnel only. 

CAUTION 

Use of controls or adjustment or performance of procedures other than those specified herein may result 
in hazardous radiation exposure. 

DANGER  

Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 
 

This Compact Disc player is classified as a Class 1 LASER 
PRODUCT. 
The CLASS 1 LASER PRODUCT label is located on the rear 
end exterior. 

 

NOTE:

 The manufacturer is not responsible for any radio or TV interference caused by unauthorized 

modifications made by the user while operating this equipment.   

 

 

 

Avoid installing the unit in locations described below: 
1.

 

Places exposed to direct sunlight or close to heat radiating appliance such as electric heaters, on 
top of other stereo equipment that radiate too much heat 

2.

 

Places lacking of proper ventilation or dusty places 

3.

 

Places subject to constant vibration 

4.

 

Humid or moist places 

 

 

 

Operate all unit controls, bottoms and switches as instructed in manual. 

 

 

 

Before turning on the power for the first time, make sure that the power cord is properly installed 

 

 

 

Store your tapes or CD in a cool area to avoid damage from heat. 

 

CAUTION:

  TO REDUCE THE RISK OF ELECTRIC SHOCK, DO DOT REMOVE PLASTIC 

UNIT COVER (OR BACK CABINET). THERE ARE NO USER SERVICEABLE 
PARTS INSIDE, IF UNIT NEEDS SERVICE, PLEASE TAKE THIS UNIT TO 
QUALIFIED SERVICE PERSONNEL ONLY 

 

WARNING: 

Remove batteries if they become exhausted or if you know that this unit will not be used 

again after a long period of time 

 
The incorrect use of batteries can cause electrolyte leakage, which can corrode the battery compartment 
or cause the batteries to burst out, therefore: 
-

 

Do not mix battery types, e.g. alkaline with zinc carbonate. 

-

 

When inserting new batteries, replace all batteries at the same time. 

 

Summary of Contents for NPB-427










Reviews: