Naxa NPB-426, Instruction Manual

Page: 12 / 54

Page 12 Naxa Electronics
Connect Power
The unit can be powered by AC household power, or by
batteries.
AC Power
Make sure the AC voltage switch [32] is set to match
the voltage supplied in your region. Contact your local
power utility if you are not sure which type of power
you have.
The voltage switch is located inside the battery com-
partment [29] found on the back of the main unit. (Set
this switch to 110V in North America.)
1. Remove the battery compartment lid to reveal the
AC voltage switch.
2. Push gently on the switch with a flat head screw-
driver to set it.
3. Replace the battery compartment lid.
4. Connect the AC power socket [27] to a household
power socket with the included power cord.
Battery Power
Install 8 UM-1 “D” size batteries to enjoy music wher-
ever you are.
1. Remove the lid from the battery compartment [29]
found on the back of the main unit.
2. Load eight “D” size batteries, taking care to match
the polarities marked on the inside of the com-
partment.
ѥ
ѥ
Remove the batteries if they are exhausted
or will not be used for a long time.
Batteries contain chemicals that may be
regulated by your local government. Dis-
pose of them properly according to regula-
tions.