Page
7
Radio Operation
Basic Functions
1.
Slide the FUNCTION SELECTOR (14) to RADIO
position to turn on radio.
2.
Slide the BAND SWITCH (15) to AM or FM as
desired.
3.
Turn the TUNING KNOB (16) to receive the desired
radio station.
4.
Turn the VOLUME KNOB (12) to adjust the volume
level.
5.
When finished listening, slide the FUNCTION
SELECTOR (14) to TAPE position to turn off the
unit.
Recording
1.
Slide the FUNCTION SELECTOR (14) to TAPE
position.
2.
Press the STOP/EJECT BUTTON (2) to open the
cassette door.
3.
Insert a blank cassette tape in the slot on cassette
door (Magnetic tape face up).
Note
: Make sure the erase prevention tab on the top
of the tape had not cut off as figure below. Otherwise,
the tape can’t be used for recording.
4.
Close the cassette door.
5.
In stop mode, press the REWIND (4) or F.FWD
BUTTON (3) to select the location on the tape where
to start recording then press the STOP BUTTON (2)
to stop.
6.
Press the RECORD BUTTON (6) to start recording.
Speak into the built-in microphone.
7.
When finished, press the STOP BUTTON (2) to stop
recording and shut off the unit.
Note
: To record the radio program, slide the FUNCTION
SELECTOR (14) to RADIO. Find the desired radio station
and start to record using Steps 1-7 above
.