Naxa NPB-264, User Manual, Page: 6 / 10

E-5
1. Handle 10. VOL– (volume down)
2. CD Door 11. VOL+ (volume up)
3. FM Telescopic Antenna 12. STOP
4. Speaker 13. PLAY/PAUSE
5. LCD screen 14. AC Power jack
6.

/+ (Next/Tuning up) 15. AUX IN jack
7.

/– (Previous/Tuning down) 16. USB port
8. MODE 17. Battery Compartment door
9. FUNC/Power (Function/Power)
IMPORTANT NOTES
Avoid installing the unit in the locations described below:
•
Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
•
Dusty places.
•
Places subject to constant vibration.
•
Humid or moist places.
POWER SOURCES
This unit operates on AC 120V~ 60Hz or 6 x DC 1.5V “C” size batteries. Do not attempt to operate the radio
on any other power source. You could cause damage to the unit and void your warranty.
Please be sure the power outlet you plug this unit into is working and receives constant (unswitched) power.
AC OPERATION
1. When the AC power cord (included) is connected to the AC Power jack [14] on the back of the unit and
the other end is plugged into a 120V AC~ 60Hz wall outlet, the unit will disconnect the batteries
automatically, and operate on AC power only.
2. Press the FUNC button [9] to turn the unit on and to change between CD, FM, FM ST., and AM modes.
To turn the unit off, press and hold the FUNC button [9] until the LCD display reads “OFF.”
DC BATTERY OPERATION
1. Remove the Battery Compartment door [17].
2. Install 6 x 1.5V “C” size batteries (not included) according to the polarity diagram inside the battery
compartment.
3. Close the Battery Compartment door [17].
IMPORTANT: Be sure that the batteries are installed correctly.
The wrong polarity may damage the unit and void the warranty.
For best performance and longer operating time, we recommend the use of good quality
alkaline-type batteries.
CAUTION
1.
Do not mix old and new batteries.
2.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3.
If the unit is not to be used for an extended period of time, remove the batteries and disconnect it from all
power sources. Old or leaking batteries can cause damage to the unit and may void the warranty.
4.
Do not incinerate batteries in fire to dispose of them; batteries may explode or leak. Follow all local
regulations for the proper disposal of batteries.
BATTERY REPLACEMENT
When the output sound of this unit becomes distorted or the CD player operation appears unstable, the
batteries are weak and need to be changed. Replace all of the exhausted batteries at the same time as soon
as possible to avoid battery leakage.