Naxa NF-900, Instruction Manual

Page: 6 / 20

Page 6 Naxa Electronics
Getting Started
1. Extend the digital photo frame bracket on the back
of the frame to the widest position for greatest
stability.
2. Plug one end of the included AC adapter into a
standard 100-240V AC electrical outlet and the
other end into the right side the frame.
3. Remove the protective film covering on the screen.
4. Turn the unit on by pressing the Power button on
the backside of the frame.
L L
After turning on the frame, it will show the
startup screen, and then the Main Menu
after 3 to 5 seconds.
L
⚠
The adapter supports AC 100-240V power
only.
Do not connect the power adapter to a
power outlet other than that which is
indicated here or on the label as this may
result in the risk of fire or electric shock.
Do not handle the power plug with wet
hands. Doing so may cause electric shock.
Do not use the adapter with any other
power source.