Naxa NDL-287, Instruction Manual, Page: 25 / 46

www.naxa.com Page 25
Watching TV
After you have searched for and added channels to the
Channel list, you can do the following while watching
TV:
FWD/UP
(CH+) Press to tune to the next channel in the chan-
nel list.
REV/DOWN
(CH-) Press to tune to the previous channel in the
channel list.
PLAY/PAUSE/
ENTER/PAIR Press to view the channel list. Press again to
pick a channel to watch.
PROGRAM View the electronic program guide.
AUDIO Press to change the audio track if the broad-
cast contains an alternate track (e.g., SAP/MTS
programs).
Numeric
Keypad (0-9) Enter a channel number and then press ENTER
to tune to a channel directly. To tune to a sub-
channel, enter the entire channel number. For
example, press “1” “3” “2” to tune to channel
13-2.
MODE/TV
MENU Press and hold to view the TV options menu.
TV Options Menu
Adjust the options for the TV.
While in TV mode, press and hold MODE/TV MENU
[4] to access the TV Options menu.
Use the direction keys to browse the menu screens
and to adjust the options (PREV/LEFT, NEXT/RIGHT,
FWD/UP, REV/DOWN).
+" +*}+X>'}'?='<}+&< ~~‚ "
highlighted selection.
Press and hold MODE/TV MENU [4] to go back to
the previous level or screen.
L
You may also use the arrow keys and the
ENTER key on the remote control.
Search Menu Options
Country Set the location of the unit.
Auto Search =%#"
range and save them to the Channel list. This
will overwrite any previously saved Channel
list.