Naxa ND-841, Owner'S Manual

Page: 13 / 19

OPERATION
MUTE
Press MUTE button during play, the player shows and there is no audio output (silence), press
again to cancel MUTE.
OSD
Press OSD button during play to show the disc s relevant information on TV screen(such as playing
time, chapter number, playback status).
A-B REPEAT
Press A-B button during playback at the point where repeat play is to commence (a) then press again
at the point where repeat play is to be concluded (B). Repeat playback between point (A) and point (b)
starts. Press A-B button once more where TV screen appears REP OFF to return to normal play.
REPEAT
Press the repeat key to choose repeat play chapter or title (DVD) and play single audio or full disc
(VCD, CD, MP3).
Note: Some VCD do not have repeat function with PBC ON state.
ANGLE
Press ANGLE continuously during playback DVD disc to toggle the disc between available angles
recorded on the disc if the disc has multi-angle function.
Press AUDIO button during playback to toggle between available audio language recorded on the
disc if the disc has this multi-language.
Note: Press AUDIO button could toggle available audio language soundtracks.
AUDIO
PROGRAM
Press PROG button, the program playback screen appears on the TV monitor, 20 tracks
or chapters can be programm ed. Use button on the remote control to select your
preferred track (CD/VCD) or title and chapter (DVD), then press ENTER button to confirm.
Use CLEAR button to amend false or unsatisfied settings. You can only press the PLAY button on
the remote control to start playing after you finish the program setting. Press the PROG button
directly to return to normal play mode. In this case, the program is not confirmed.
“ : SELECT : PLAY ” shown on screen is only used for indication, no function for cursor .
SETUP:
For the details, please refer to the introduction of menu setup.
12