background image

 Page 8

 Page 7

An insulation tag was installed in your remote by the manufacturer to prevent the
battery from draining. Removing the tag from the remote before using.

BATTERY INFORMATION:

Lithium Battery: CR2025 3V
Battery Life: Approximately 6 months.

Replacing the Battery from the Remote Controller:

1) Remove the battery holder by pressing the locking tab with your thumb
    and pulling it out.
2) Replace the battery with the same type and the 

 side facing up.

3) Gently push in the holder until securely locked into place. 

       WARNING

:

  

+

 Do not recharge, disassemble or dispose of in fire.
 
 Battery leakage may cause damage to the unit.
 
 To avoid the risk of accident, keep batteries out of reach of children.

MAINTENANCE OF REMOTE CONTROL

1. Power On/Off.                   

2. Mute Button

3. 

4. 

    

5. SEL/MENU

Loudness Button 

   

Audio Level & Menu UP(+) Button

 Button

6. Audio Level & Menu Down(-) Button  

7. MO/ST Button                 

8. A.P Button   

9.Band Button                  

10. Mode Button

11.Tune/Seek Up And Track Skip Up/FF Button

12.Tune/Seek Down And Track Skip Down/REW Button

13.SCAN Button

14. Clock Display /Setting Button           

15. LOC/DX Button

16. CD Track TOP/>||/Radio Preset 1     

17. CD Track INT/Radio Preset 2

18. CD Track RPT/Radio Preset 3           

19. CD Track RDM/Radio Preset 4

20. Radio Preset 5                                     

21. Radio Preset 6

OPERATION OF REMOTE CONTROL

4

6

8

3

16

20

7

11

2

10

17

5

19

21

18

1

14

13

15

9

12

Summary of Contents for NCA-699









Reviews: