Page 12
Naxa Electronics
Pairing a Bluetooth
®
Device
A Bluetooth enabled device must be paired with the
receiver before using them together for the first time.
After a device has been paired, the receiver will auto-
matically connect to it when placed in BT (Bluetooth)
mode.
Note: Only one device at a time can be connected to
the receiver. Use your device to unpair with the receiver
before attempting to pair another device.
1. Make sure Bluetooth® is enabled on your device.
Enable it if it hasn’t.
2. Press MODE on the receiver until the display reads
BT.
3. Use your device to search for available Bluetooth
devices (i.e., your receiver). This function is usually
in the Bluetooth settings menu; refer to your de-
vice’s instruction manual to learn more
4. The receiver will announce itself as “NAXA NCA-
615.” Select the receiver.
Notes:
If the pairing process fails, turn the receiver off, press
MODE to place it in BT mode again, and repeat steps 1-4.
Make sure that the volume of your device is set to its
maximum level; then use the receiver to adjust the
volume to a comfortable level.
The speaker cannot be paired with more than one de-
vice at a time.
Press MODE until the display reads BT.
