background image

13. 

Next

, the DEVICE LIST will appear as 

shown below:

<

DEVICE LIST

LR

No song

Play All

NAS-5001_XXX

Tap  "       " to add more speaker

s

 to the 

network

. R

epeat the procedures above 

to

 make connection 

and follow the on-

 

screen instructions.

Tap  "       " to rename the speaker,  
check the speaker info

reset to the

factory setting

, or check the preset content.

Tap  "       " to change the audio mode 
to L(left channel), R(right channel) and

LR

LR(stereo).

14.  If more than one speaker has been added into 

R

You Belong with me

Bedroom

....................................................

R

Bathroom

R

Bathroom

Because of you

....................................................

R

You Belong with me

Bedroom

Multi Mode: Press and hold device icon and 

drag towards another device to pair devices.

Solo Mode: Press and hold device icon and

drag down past dotted line.

mode as 

shown on 

the figure

 below

.

NOTE: For iOS device, touch and slide 

downward from the top of the device's

screen to update the 

the device will be added to 

the DEVICE LIST.

the DEVICE LIST, you can tap the

 instruction

to learn how to switch 

between

 solo and multi

DEVICE LIST. If 

there is another device on same 

network,

<

DEVICE LIST

LR

LR

...............................................

How to switch between solo and multi mode?

No song

Play All

NAS-5001_XXX

NAS-5002_XXX

12

Summary of Contents for NAS-5001







































Reviews: