background image

POWER SOURCE: 

 

There is a built in Li-ion rechargeable battery, recharge it if the battery is low.
1. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro

 USB Port on the rear of unit.

2. Connect the full sized USB Plug from the supplied USB Connection Cable to the  

USB Port on the USB Charger  (During 

When finished, it will turn off).

  

AUX IN:

To listen from an external Audio Player such as a MP3 Player, Discman …etc.

    charging, the charge indicator on the top of 

unit will turn RED, 

1. Connect one end of the Audio Connection Cable to the AUX Out/Line Out/Phone 

Jack on the external Audio Player.

2. Connect the other end of the cable to the AUX IN Jack on the rear of the unit. 

3. Play the music on the connected Player as usual.

 through the microphone on  

Switch on the unit, wait the mode indicator blinks green only,  press the MODE 

button repeatedly until the Mode Indicator will turn INDIGO. 

4

NOTES:

Your battery will last longer if you're following these simple guidelines for charging
and storing:
A. Before first time use, charge it approximately hours until the unit is fully charged.
B. Recharge and store the unit within the temperature range of 5°C~35°C

(40°F~95°F).

C. Do not charge longer than 24 hours. Excessive charging or running the

unit until battery fully drains will damage battery. Battery life will be extended

if you keep the battery fully charged.

D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated in this product is not user replaceable.

4

Summary of Contents for NAS-5000














Reviews: