www.naxa.com
Page 5
Connecting to Power
Your speaker has an integrated rechargeable
battery. Upon initial use, the battery should be
fully charged to ensure optimal performance
and battery life.
Use the included USB charging cable to connect
the speaker to a USB power source to charge the
battery.
In order to extend the life of the battery, please do
not charge more than 6 hours. Over charging the
speaker can adversely impact the battery life.
Bluetooth® Mode
Your Bluetooth
®
speaker can wirelessly stream
audio from any Bluetooth
®
enabled device within
the distance of 26-33 ft. Please follow the steps
below to setup connection.
1. Plug the included Micro USB cable into the
Micro USB port on the back of the speaker
(under the detachable casing). Connect the
other end of the cable with any compatible
charger or wall outler.
2. When charging, the LED indicator on the
front of the speaker will illuminate and turn red.
When the speaker is fully charged, the LED
indicator light will turn off.
1. Ensure that the speaker is turned on.
2. Ensure that your external device is set to
Bluetooth mode.
3. Turn the speaker on by pressing the power
button. After a few seconds, the LED indicator will
begin flashing as the speaker enters pairing mode.
4. On your Bluetooth-enabled external device,
navigate to the Bluetooth settings menu and
initiate a device search.
5. After a few seconds, “NAXA NAS-3097” will
appear on the devices list. Select it to connect and
pair.
6. If a password prompt appears, please enter
“0000” to continue pairing.
NOTE: If your external device’s Bluetooth version
is below 2.1, you may be asked for a password.
