Naxa NAS-3080, Instruction Manual

Page: 9 / 16

www.naxa.com Page 9
Using the Radio (FM)
Your speaker can receive FM radio broadcasts. Press
and hold [6] to switch the speaker to Radio mode.
L L
For better reception, plug the small micro
USB connector of the included cable into
the DC 5V port of the speaker [1].
The first time you use the FM radio, press to scan
for stations and save them to preset memory. You
should also do this if you move the speaker to a differ-
ent location as the available stations will change.
When listening to the FM radio:
To do this... ...do this
Scan for stations and save them to
preset memory
Press .
Tune to a lower preset station Press .
Tune to a higher preset station Press .
Decrease the volume level Hold .
Increase the volume level Hold .
Using the Music Player
(MP3)
Your speaker can play MP3 files from microSD/microS -
DHC memory cards as well as USB flash memory de -
vices. Load memory cards in the TF slot [5]; USB flash
drives should be plugged in to the USB port [4]. The
speaker will switch to Music Player mode automati-
cally when it detects a USB flash drive or memory card.
L L
Music Player mode is only available when
the speaker detects a compatible memory
card or USB device.
The memory card and USB reader cannot
be used at the same time. Please connect
only one type of memory device at a time.