Naxa NAS-3062, Instruction Manual, Page: 8 / 16

Page 8 Naxa Electronics
Using the MP3 Player
Your speaker can play MP3 files from microSD/microS-
DHC memory cards as well as USB flash memory de-
vices. Load memory cards in the TF slot [5]; USB flash
drives should be plugged in to the USB port [4]. Set
the Function switch [1] to the MP3 position, then press
M / [7] until the speaker is in MP3 player mode.
L L
MP3 player mode is only available when the
speaker detects a compatible memory card
or USB device.
The memory card and USB reader cannot
be used at the same time. Please connect
only one type of memory device at a time.
When the speaker is in MP3 player mode:
To do this... ...do this
Start, pause, or resume audio
playback Press M / .
Skip to the previous track Press /–.
Skip to the next track Press + / .
To do this... ...do this
Decrease the volume level Hold /–.
Increase the volume level Hold + / .
Switch between FM, MP3, and AUX
modes Hold M / .
L
⚠
Do not remove memory cards from the
speaker while the speaker is on. Doing so
may damage the speaker system or mem-
ory card.
Using the AUX Input
Connector
Connect devices without Bluetooth
®
by using the AUX
connection. The included 3.5mm AUX cable is required
to make this connection.
1. Use the 3.5mm plug of the included AUX cable to
connect the device’s headphone or line-out jack to
the AUX input jack of the speaker [3].