Naxa NAS-3045A, Instruction Manual, Page: 6 / 13

Page 6 Naxa Electronics
Using the FM Radio
Turn the speaker on, then press and hold to set the
speaker mode to FM Radio.
To do this... ...do this
Auto scan for a station within
reception range Press .
Manually tune to a lower
frequency Press –.
Manually tune to a higher
frequency Press +.
Decrease the volume level Press and hold –.
Increase the volume level Press and hold +.
Change the speaker mode be-
tween Bluetooth and microSD/
FM Radio/AUX Press and hold .
Using the USB/AUX In-
put Connector
Connect devices without Bluetooth® by using the AUX
connection. The included 3.5mm adapter combination
cable is required to make this connection.
1. Use the 3.5mm plug of the included combination
AUX cable to connect the device’s headphone or
line-out jack to the DC5V/AUX connector of the
speaker.
2. Turn on the device and the speaker. Lower the vol-
ume on both.
3. Set the device volume to 80% of its maximum and
then start playback.
4. Press and hold
+
to gradually increase the volume
of the speaker to a comfortable level.
L L
Use the connected AUX device to control
all functions in AUX mode. The speaker can
only be used to adjust the volume.