Naxa NAP-20, Instruction Manual

Page: 5 / 11

www.naxa.com Pagina 5
4. Flashlight
5. USB Power Output
6. Battery
Using the Battery Pack
Getting Started
1. Remove the battery pack from the box.
2. Remove any packaging from the product such as
tape or protective film.
3. Check to see if everything is included in the box.
Retain all packaging for future use.
4. Charge the battery pack.
Charging the Battery Pack
1. Use the included USB charge cable to charge your
device from any USB port on a computer. You may
also use the included cable to charge your device
with a USB power adapter (optional). When using
a power adapter, make sure that its rated output
matches your device. (Please refer to the Specifica-
tions section for your device’s Power rating.)
2. The Status LED will flash red while the battery pack
is charging. It will turn off when the battery pack is
fully charged.
L L
Although the battery pack is charged fully
at the time of manufacture, it is still a good
idea to give it a charge before using your
device for the first time. Fully charging your
battery using it can help its performance
and lifespan.