05
04
4.2 Operating instructions for specific functions
4.2.1 Start-up mode
Hand-held and scale will be made by paired test before it leaves factory, firstly switch on hand held,
press the power key, It is successful linked while scale wireless connection indicator(blue light)
long bright, and meanwhile wireless signal indication and power displayed on the LCD screen. The
scale is on ordinary weighing mode at this situation.
(Note 1: The hand-held device will be automatically shut down after 5 minutes if it failed to connect
the pan; if connection succeeds, the scale will be closed automatically if the weight on the scale will
not change in 10 minutes; the actual weight will be displayed when the weight on the scale more
than 4.4Ibs as it re-started.
(Note 2: Overweight alarm prompt: if the goods being weighed is beyond the weighing range, the
beeper alarms. Please take down the goods immediately from the weighing pan.)
(Note 3: Please check if the code on the back of hand held in accordance with the code on back of
pan)
4.2.2 Measurement unit setting
With measurement unit setting, you can switch between Kg + g or Lb + oz units.
1
.
After switching on the hand-held device, the LCD display will be as follows (the default unit is kg
+g):
4.2.3 Back-light setting
You can select with or without the back-light, based on different conditions. The default setting is no
light. Press the button in order to switch on the light, and press it again to switch it off. The light
4.2.4 Clear setting
stays on for 30 seconds, after 30 seconds it will switch off automatically.
2. Depending on the different requirements, press the key, and the weighing unit will switch to
Lb + oz, which will be displayed as bellow:
Kg
g
In the standard weighing mode, pressing , the weight value of the item on the scale will be set to
zero.
The scale zeros off automatically and data display goes to “0” if weight on the scale is less than 4.4
lbs, or more than 4.4 lbs without making any changes to output with actual weight data.
Note:
While using the Clear program, ensure the vessel on the scale is in weight normal range, and the
weight does not exceed the measuring range of the scale.
4.2.5. Charge mode operation
The user can use this function to rapidly and safely add refrigerant to the system. After entering the
“Charge” mode, enter the charge value, and start charging. The minimum charge amount is 1.8
oz.
1. Switch on the scale.
2. Place the refrigerant container on the scale, and wait until the reading stabilizes, displaying
total weight of the container. For example, if the container’s total weight is 29Lb+15.7oz, the
display will be as follows:
3. Press and the LCD screen will display the “Charge” function sign. Then enter the net weight
of the refrigerant to be added, and after pressing the ENTER button , the net weight to be
charged will be displayed. For example, if you want to add 4lbs+6.5oz of refrigerant, first press ,
then enter “0-0-4-0-6-5” on the number pad based on the LCD flash figure, then press . The
following will be displayed.
Lb
oz
Lb
oz