P R E C A U T I O N S
•
Storage and Keeping
1.
Do not expose this equipment to excessive heat or cold place. The storage
temperature of the monitor is +68°F~+140°F (+20°~+60°C), the operating
temperature is +32°F~104°F (0°C~+40°C)
2.
Avoid the machine from dropping or impacting.
3.
Never extrude or fractionize this machine with sharp objects.
4.
Cables are not allowed to touch hot or rotating parts, such as engine,
ventilators, etc.
5.
Keep this equipment out of children’s reach.
•
Operating Precautions
1.
Connect this equipment only to other compatible units.
2.
Make sure that all cables are connected properly, Improper connection may
result in system failures or damages to the system.
3.
Cables are not to be pinched or stepped on.
4.
Remove the cable connections when system is not in use.
5.
The camera must not be located directly under the sun or any other bright
light source because this will not only result in a poor image, but also will
eventually damage the electronics of the camera
6.
Additional lighting may be required if water quality is poor, or in low light
conditions
•
Maintenance
1.
Remove all cable connections before cleaning the camera.
2.
Wipe off the moisture on the lens of camera regularly.
3.
Keep the camera clean and dry when it is not in use.
4.
Dry all equipment before storage
Summary of Contents for Neptune Tiburon
Page 2: ......
