12
Using
Manual Synchronisation to the DCF time signal
Press the signal search key WAVE (6) to manually receive
the radio time signal. The alarm clock synchronizes to this
signal and sets up time and date. During synchronisation
the radio icon (2) flashes on the display. After a successful
reception of the time signal, the current time and date are
displayed.
Setting the Alarm Time
1. Press and hold the ALARM key (7) for approx. 3 sec-
onds to enter the alarm time setting mode. The hour
digit of the alarm time flashes.
2. Use the UP key (11) and the DOWN key (5) to set the
hour digit. Press the ALARM key to confirm the setting.
The minute digit flashes.
3. Use the UP key (11) and the DOWN key (5) to set the
minute digit. Press the ALARM key to confirm the set-
ting. The current time is displayed.
Activating the Alarm
1. Briefly press the ALARM key (7) to activate the alarm
function. The alarm icon
is displayed.
2. Press the ALARM key once more to deactivate the
alarm function. The alarm icon disappears.
3. Having the alarm activated, the alarm signal sounds at
the set alarm time. Press any key to turn off the alarm
sound. Or press the snooze key SNZ (8) to activate the
