5. NavNet TZtouch3 Fish Finder
Q1.FF
Can I use an external Black Box Fish Finder in a TZtouch3 network?
While TZtouch3 MFDs provide a built-in 1kW CHIRP/CW Fish Finder, you may opt to also utilize
a Furuno black box Fish Finder, such as the BBDS1, DFF3D, DFF1-UHD, DFF3D Sonar or add
the DI-FFAMP 2/3kW high power CHIRP amp. Please note that older black box fish finders, the
BBFF1 and BBFF3 are not compatible.
Q2.FF
How many Black Box Fish Finders can I have in a TZtouch3 network?
A maximum of two fish finder sources and one DFF-3D Sonar in one TZT2/3 network.
Q3.FF
Does TZtouch3 support PBG?
At this time, TZtouch3 does not support PBG. This feature is expected to be released Fall of
2020
Q4.FF
Can I use my existing 10pin Furuno transducer with the Internal Sounder of
TZtouch3?
Yes. While the transducer connector of the TZtouch3 has a 12pin connector to support dual
channel CHIRP transducers, the TZtouch3 is supplied with a 12pin to 10pin adapter for use with
conventional transducers.
Q5.FF
Which transducers support Bottom Discrimination and Accu-Fish with
TZtouch3?
Please see the TZtouch3 MFD product page for a complete list of available transducers and their
specifications.
Q6.FF
Does Furuno stock CHIRP transducers for the internal TZtouch3 CHIRP
sounder?
Furuno USA stocks dual and single frequency CHIRP transducers from 300w to 1kw, as well as
low, medium, and high frequency bands. Please see the TZtouch3 MFD product page for a
complete list of available transducers and their specifications. For 2 or 3kw transducers, the DI-
FFAMP is required.
6. Cameras, Video Inputs/Outputs and External Monitors
Q1.CAM
Can FLIR M-Series Cameras be controlled from NavNet TZtouch3?
Yes. Configuration information can be found in a dedicated document on the TZtouch3 product
pages at www.FurunoUSA.com.
Q2.CAM
Are TZtouch3 MFDs compatible with IP Cameras?
TZtouch3 is currently compatible with Axis IP Cameras only and with FLIR M100 and M200
cameras.
Q3.CAM
What type of video inputs are available?
TZtouch3 MFDs have two (2) Analog inputs. Up to four (4) Axis IP cameras and two (2) Axis
Quad Video servers are supported. Additionally, the TZT16F and TZT19F have one (1) HDMI IN
port. The HDMI IN port along with the USB pass thru port can be used to view and control a
PC.
