Navman VHF 7000, Owner'S Manual

Page: 9 / 54

9
Press + or - to change to a different weather channel.
Press WX, then 16/9, then CALL MENU to leave the weather
channels and return to the most recent channel.
If a weather alert is broadcast when you are in SCAN mode, it is
picked up automatically and the alarm sounds. Press any key to
hear the weather alert.
H/L Transmission Power. High (HI) 25W or Low (LO) 1W. Press to
toggle between high or low transmission power for the entire
channel bank. The HI or LO selection is shown on the LCD.
Some channels allow only low power transmissions. Error beeps
will sound if the power transmission setting is incorrect. Press
H/L to change it.
Some channels allow only low power transmissions intially,
but can be changed to high power by holding down H/L and
PTT at the same time. See Appendix C for a complete listing of
channel charts.
3CH Three Favourite Channels. Also on the microphone. Press to
toggle between your favourite channels. The CH1, CH2, or CH3
symbol appears on the LCD to show which favourite channel is
selected.
To add a favourite channel for the first time, select that channel
then hold 3CH to store it in the CH1 location. Repeat the
procedure to store two more favourite channels in the CH2 and
CH3 locations respectively.
If you try and add another favourite channel it will overwrite the
existing CH3. CH1 and CH2 remain unless you delete them.
To delete a favourite channel, select that channel then hold
down 3CH until the CH1, CH2 or CH3 symbol disppears off the
LCD.
UIC Channel Bank. 7100 USA only. Press to toggle between USA,
International or Canadian channel banks. The selected channel
bank is displayed on the LCD. All the channel charts are shown
in Appendix C.
U/I Channel Bank. 7000 only. Press to toggle between channel
banks. Note that the channel banks available are dependent
upon your VHF radio model. The selected channel bank is
displayed on the LCD. All the channel charts are shown in
Appendix C.
DIM Backlighting. 7100 EC only. Press to toggle between the
backlighting settings. OFF will extinguish all the backlighting
except for the DISTRESS key. (Otherwise, use the menu to
change the backlight setting.)
SCAN Scan. Press to scan between your current channel and the
priority channel in Dual Watch mode. The weather channel is
also scanned if the USA channel bank is selected.
Hold down SCAN to enter ALL SCAN mode where the priority
channel is checked every 1.5 seconds.