Navman S-Series, User Manual, Page: 12 / 133

S-SERIES
12
3.
Turn your Navman on
Press and hold to turn your Navman on.
Your Navman will turn on and display the Language screen.
4.
Select your preferred language
From the Select Language screen, tap your preferred language.
ƒ
To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up
check box.
ƒ
You can change your preferred language while using your Navman (see "Language" on page 84).
5.
Read the warning message
a) The Safety Agreement screen will display after you have selected your preferred language.
Read the Safety Agreement message.
b) To confirm that you have read and understood the message, tap Accept .
The Tutorial will display.
6.
View the Tutorial
When you have accepted the Safety Agreement, the first Tutorial screen will display.
ƒ
To prevent the Tutorial from displaying again on start-up, clear the Show on start-up check box.
ƒ
To move forward through the Tutorial screens, tap .
To view the previous screen, tap .
ƒ
To view the Tutorial again while using your Navman, see "Tutorial" on page 94.
Note: If you have maps installed from multiple continents, you may be prompted to select the maps you require.
To use maps from a different continent at a later time, you can select a different map via the Select Map screen in the
Select Map 3/3 preferences; refer to page 77.
When you have finished the Tutorial , the 3D Map screen will display. If you have a GPS fix, your current location will
be displayed on the map.