Ofrecido por www.electromanuales.com
S-Series
115
4.
Complete
the
following:
If you want to ...
Then ...
select an icon to display on the map
screens for POIs of the category
Click
Browse
to select the icon file from your local or network drive. When you have
located the icon file, select it and click
Open
.
The icon file must be a bitmap (.bmp) graphic with a minimum size of 6x6 pixels and a
maximum size of 32x32 pixels.
Note:
If you do not select a custom icon, a default icon will display.
enable a visual warning when a POI of
this category is in close proximity
select the
Visual alert
check box.
enable a warning sound when a POI of
this category is in close proximity
select the
Audio alert
check box.
select the distance from a POI of this
category at which the visual warning
should display or the warning chime
should sound
select the distance from the
Distance
box.
Note:
To change the units used to measure distance for this POI category, from the
tools menu click on options and from the general option select
Use metric units
check
box.
select a custom sound alert file to play
when a POI of this category is in close
proximity
Either select a sound file from the list, or
Click
Add
to select a sound file (.WAV format) from your local or network drive.
When you have located the file, select it and click
Open
.
Note:
If you do not select a custom sound file, a default sound alert will play.
5.
Click
on
Add to device
button to add the POI to your Navman.
Note:
Each POI file corresponds to a POI category; for example, Hotels .csv will be listed in your Navman as the Hotels category.
How do I delete a Custom POI File from my Navman?
1.
On
the
Installed POIs
section click
Delete
next to the file name.
The file is removed from the list, but is not yet deleted.
2.
Accept the warning message.
The selected file is deleted.
