Unless otherwise stated all dimensions are in mm.
Tolerances: 0 ± 0.2 – 0.0 ± 0.1
Note: when fitting to housing or enclosure, ensure
there is a minimum air gap of 3.0 mm between any
point on the patch antenna and the plastic housing
components view
side view
patch antenna view
Ø 3.5
RF connector
MMCX Jack
Straight
15.6
3.8
39.0 ± 0.25
34.0 ± 0.25
8.0
8.5
JST connector
JST-SM06B-SRSS-TB
4.3
3.5
4.5
2.5 MAX
0.8
3.0
6.8
1
LA000504D © 2006 Navman New Zealand. All rights reserved. Proprietary information and specifications subject to change without notice.
Figure 9-1: Jupiter 110 mechanical layout
9.0 Jupiter 110 mechanical layout
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
