Version 02.08.2022
HW: 16-(V65)
VL1-MBN4
P
age
9
2.4.
Connection - factory monitor
Connect 10pin Microfit connector of the LVDS Switch to the 10pin Microfit
connector of the video-interface.
Disconnect the vehicle harness’ 10pin LVDS connector at the rear-side of the factory
monitor and connect it to the male 10pin connector of the LVDS switch-box.
Attention: The angle position of the factory female 10pin LVDS connector’s cable
may vary and moreover the connection isn’t non-interchangeable!
Pay attention to a correct connection of the 10 pins inside!
Connect the female 10pin LVDS connector to the previously become free 10pin LVDS
connector of the factory monitor
