Version 10.09.2019
HW (V31)
RL5-MIB-STD2
P
a
g
e
8
After the ribbon cable connection, fix the daughtger PCB at the front panel-retaining
plate by using the enclosed screws.
After the daughter PCB’s previously mounted 20pin LVDS cable is lead out from the
housing at a suitable location, reconnect the front panel with its 6 screws to the head
unit’s housing. Avoid cable contusion or cable injury caused by sharp-edged metal.
2.3.1.
Warning notes, concerning the installation of ribbon cables
1) The contacting ends of ribbon cables always have to be installed in a straight and precise
180° position to the connector. Each deviation from a perfect contact position will curse
faulty contact and even danger of short circuit
2) The ribbon cable’s contacting side always has to correspond to the contacting side of the
connector, concerning the mounting position.
All manuals and user guides at all-guides.com
