Version 14.03.2023
HW CAN(V100)/GW2A(V20)
RL4-UCON8-20
P
a
g
e
14
2.6.
Connection – 10pin Power / CAN cable without PNP section
Connect the female 10pin connector of the 10-pin power/CAN cable shortened by the PNP
section to the male 10pin connector of the video interface.
Connect the single yellow coloured wire to stabile
+12V terminal 30
.
Connect the single brown coloured cable to the vehicle’s
negative
Ground
.
Connect the single blue coloured cable to
CAN High
.
Connect the single grey coloured cable to
CAN Low
.
