Version 15.12.2022
HW: CAM(V100)/256(V22) +GW2A(V25)+GW2A(V30)
RL4-MIB88
P
a
g
e
12
2.4.1.
Connection – picture signal cable
Disconnect the factory picture signal cable’s black female HSD connector at the rear-side of
the head unit and connect it to the waterblue coloured male HSD connector „TO LCD“ of the
video interface.
Connect the unangled female waterblue coloured HSD connector "To HU In-Interface" of
the enclosed picture signal cable to the waterblue coloured HSD connector "HU IN" of the
video Interface.
Connect the opposite angled waterblue coloured HSD connector "To HU" of the enclosed
picrure signal cable to the previously become free HSD plug of the head unit.
Note: Depending on the installation conditions, the enclosed picture signal cable may also
be mounted upside down, concerning it’s HSD connectors . However, it‘s connection must
only be made at the head unit!
