Version 09.02.2023 HW: CAM(V31)9275&9276(V11) since serial-no. NA210400258 with frontcam input
RL2-SC14
P
a
g
e
13
2.6.
Connecting video sources
It is possible to connect an after-market rear-view camera, an after-market front camera and
one more after-market video source to the video-interface.
Note: Before the final installation, we recommend a test-run to ensure the compatibility of
the vehicle and the interface. Due to changes in the production of the vehicle
manufacturer there’s always a possibility of incompatibility.
Connect the female 6pin connector of the video cable to the male 6pin connector of
the video-interface.
Connect the video RCA connector of the rear-view camera to the female RCA
connector
“Camera-IN”
of the video cable.
Connect the video RCA connector of the front camera (or an additional video source)
to the female RCA connector
“Video-IN 1”
of the video cable.
Connect the video RCA connector of an additional video sources to the female RCA
connectors
“Video IN 2”
.
