Version 08.02.2023
HW CAM(V31),(V22)
RL2-MBN45
P
a
g
e
17
3.
Interface operation
2.6.
By infotainment-buttons
Some of the Comand-buttons can be used to execute interface functions.
Long press C button (3 sec.) beside knob in centre console to switch the video source. Each
repetition will switch to the next enabled input. If all inputs are enabled the order is:
Factory video
video 1
video 2
factory video
Inputs which are not enabled by dip switch settings are skipped.
Switchover by vehicle buttons isn’t possible in all vehicles. In some vehicles the external
keypad must be used.
Note: The white wire of the 6pin cable can be used with a +5-12V pulse to switch the video-
sources alternatively.
3.1.
By keypad
Alternatively or additionally to the factory infotainment buttons the interface’s external
keypad can be used to switch the enabled inputs.
4.
Specifications video-interface
BATT/ACC range
7V - 25V
Stand-by power drain
15mA
Power
310mA
Video input
0.7V - 1V
Video input formats
NTSC
Temperature range
-40°C to +85°C
Dimensions video-box (W x H x D) 113 x 22 x 115mm
Dimensions CAN-box (W x H x D)
89 x 27 x 65 mm