Version 22.12.2022
HW CAM (V31)(V64)
RL1-GVIF
P
a
g
e
11
2.4.1.
Special case 1: For Jaguar and Land Rover vehicles with touch-screen version-1
In vehicles with touch screen version-1, the female blue GVIF connectors of the vehicle
harness and the female blue GVIF connector of the picture signal cable have to be cut,
changed against each other and soldered.
Cut both female GVIF connectors of the vehicle harness and the picture signal cable
with leaving enough cable on it.
Depending on the cable colours of the GVIF interface cable, solder the female GVIF
connector of the vehicle harness to the picture signal cable and the GVIF connector
of the picture signal cable to the vehicle harness like shown in the diagram above.
