Version 10.09.2019
HW:25(V31)
RL2-DVD900
P
a
g
e
4
Requirements
brand
compatible vehicles
Navi/radio
Buick
LaCrosse, Regal-
DVD800/CD500
Chevrolet
Cruz, Orlando
DVD900/DVD600
Opel
Astra J, Insignia A, Meriva B and
other vehicles till about model year
2011
DVD800/CD500
Astra J, Cascada, GTC, Insignia A,,
Meriva B, Mokka A and other
vehicles, model years 2012-2013
DVD900, DVD600, DVD650,
DVD950 intellilink, CD600
intelliLink
Limitations
Video only
The interface inserts ONLY video signals into the infotainment.
For inserting Audio signals either the possibly existing factory
audio-AUX-input or a FM-modulator can be used. If 2 audio
sources shall be connected to the infotainment, an additional
electronic is necessary to switch them.
Guide lines
If the CAN-box does not receive the required information from
the vehicle CAN-bus, the guide-lines will not be supported.
Factory rear-view camera
Automatically switching-back from inserted video to factory
rear-view camera only while reverse gear is engaged. To delay
the switch-back time, additional electronics is required.
AV input signal
only NTSC compatible
1.2.
Checking the compatibility of vehicle and accessories
1.3.
Boxes and connectors
1.3.1.
Video-interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and
converts them for the video interface.
