Version 14.02.2023
HW CAM (V31)(V64)
CI-RL1-GVIF
P
a
g
e
12
2.4.2.
Special case 2: For Lexus/Toyota vehicles – picture is blinking after the installation
In some vehicles (Lexus/Toyota) the picture is blinking after the installation. In this case the
cable at the power connector of the factory monitor needs to be cut like in the picture
below.
Cut the cable at pin 2 of the upper row from the left side and isolate both ends.
Note:
Cable colour of pin 2 may vary.
